Furniture

Office chairs and accessories

Chair Repair
from 1000 rubles!

The master will arrive within
1 hours or convenient time!

and get a 10% discount
for subsequent work!

Home Masters company in Balashikha provides repair services for office and computer chairs of Russian and foreign manufacturers from various materials and with different mechanisms. The company's specialists are provided with consumables and professional tools, repair work is performed efficiently and on time.

Armchair - a comfortable chair with armrests, used in everyday life, public institutions, in enterprises. With active use, the seat upholstery loses its presentable appearance, and the structural elements fail.

Repair of office chairs

Employees of the company repair office chairs of any purpose and model:

  • for senior staff
  • for staff
  • for visitors
  • monolithic
  • national teams
  • on legs
  • with runners
  • with mesh upholstery,
  • with classic upholstery.

The craftsmen will check the condition of the armchairs in the office, adjust the unbalanced mechanisms, identify and fix the breakdowns. A timely repaired office chair is a comfort for the staff and the manager, which positively affects the quality of work.

Repair of office chairs and armchairs

Our experts in the process of repairing office chairs and armchairs eliminate the following defects:

  • wear of rollers (wheels),
  • damage to the cross
  • breakdown of the top-gan swing mechanism,
  • breakdown of the gas lift regulating the height of the chair,
  • sagging seats in soft chairs,
  • upholstery wear.

Executive chair repair

We provide repair services for the chair of the head of all existing models. Our specialists repair all types of swing mechanisms, which are used in office chairs of superior comfort:

  • multiblock
  • multiblock with axis offset,
  • synchromechanism
  • sipro mechanism,
  • asynchronous,
  • anti-shock effect.

Chair repair prices

We support the cost of repairing all types of chairs at an affordable level. The minimum repair price is 1000 rubles, the final one depends on the model of the chair, the extent of the breakdown, the urgency of the work.

You can leave a request for the repair of office and computer chairs of any model in Balashikha at number +7 (499) 394-66-58. Cooperation with the company "Home Masters" guarantees you professionally performed work at affordable prices.

Our advantages and guarantees

Despite the increase in VAT to 20%, we have kept prices at the same level for you! Hurry up to order!

Everyone knows that a working chair should be comfortable, high-quality, ergonomic and functional. The models presented in our store meet all these requirements. A great variety will allow, without neglecting the quality, to choose the option most suitable for the interior of the office, office and even the children's room. Only here you can buy spare parts for chairs and order repairs at home or in the workshop. Rate our benefits:
- Our prices are favorable,
- Warranties for purchased furniture - from 1 year,
- Delivery - always on time,
- We also provide repair services - quickly and efficiently,

Repair of any models of office chairs

We carry out the repair of office chairs of all types: standard, premium and for visitors. Often, only the replacement of worn or damaged parts is required - this is much cheaper than the purchase of new furniture. If necessary, adjust the operation of the lift or lubricate the movable mechanisms. We will replace the rollers, crosses, gas lift. When filling out an application, we will clarify the nature of the breakdown and will be able to say the approximate cost of services. We offer to invite a specialist to the office or deliver furniture to our workshop. Simple repair will take up to half an hour, complex - from 1 to 14 days, depending on complexity. Departure of the master is carried out on the territory of Moscow, St. Petersburg, Leningrad and Moscow regions.

Diagnosis of the breakdown of your chair and the selection of components for repair is FREE OF CHARGE (when brought to the workshop and when providing photos with dimensions)

Common breakdowns

An office chair is a rather complex device, which consists of a five-beam crosspiece, a pneumatic cartridge, a swing mechanism, a piastra, a permanent contact. Any of these elements may fail. The most common types of damage are:

  1. The seat does not fall or does not rise. The problem occurs when the tip of the lever that acts on the gas lift button breaks or bends.
  2. Wheel problems. Observed if the snap ring is missing or the sleeve breaks.
  3. The chair does not hold the "horizon". Most likely, this is due to the destruction of the swing mechanism.
  4. Back warp. Indicates the wear of the mechanisms supporting this element, loose fasteners, manufacturing defects.
  5. Decreased furniture stability. The most common causes are breakdowns of a gas lift or swing mechanism.

If at least one structural element of office chairs fails, further operation of the product is not possible until the problem is resolved. Repair parts may require new parts to replace worn or broken parts. You can order them at service centers or from furniture manufacturers.

It is not recommended to purchase office chairs with a warranty period of less than 1.5 years. It is such furniture that is most likely to fail.

Product Disassembly Steps

If the office chair is broken, the first thing to do is disassemble the structure. This will require a rubber mallet, slotted and Phillips screwdrivers, and a ring punch. All actions are performed in stages:

  1. First of all, they remove the seat, turn the chair over, take out the fasteners.
  2. Unscrew the bolts that fix the armrests, remove these parts together with the plates.
  3. The fasteners holding the permanent contact are disconnected.
  4. The spider is separated from the pneumatic cartridge, for this, gently tap with a hammer on the connection.
  5. The wheels are removed from the mounting sockets, the plugs located in the steel case are removed. The procedure is performed using a slotted screwdriver.

All manipulations with the mechanisms are recommended to be done while holding the structure on weight so as not to break fragile plastic parts. For the same reason, you can not exert physical effort when unscrewing the fasteners. After the dismantling of the computer chair is completed, it is necessary to collect all the parts in one place so as not to lose anything.

Design Features

Before proceeding with the repair of a computer chair, experts recommend that you carefully study the types and design features of such products. In specialized stores you can see the following models of computer chairs, which have individual design features:

  • for the leader - a five-beam hollow cylindrical base, multiblock adjustments for back resistance, seat depth and roll level,
  • for staff - light weight, multiblock adjusting the height of the seat, armrests and the angle of inclination of the back,
  • for guests - four legs, a comfortable seat and back.

Despite the model variety, all computer chairs have a similar design, which consists of a number of components.

  • Five Beam Cross - a plastic or metal part that supports the entire structure.

  • Videos - iron or polymer parts that are installed along the edges of the base. The maximum number of rollers is 5. A distinctive feature is the presence of metal mounts and a hinge.

  • Gas lift (gas shock absorber) - the leg of the chair, which is responsible for the elasticity of the structure.

  • Swing mechanism - A special device that allows the chair to take a comfortable position and fix it. The presence of a mixed axis creates a smooth swing effect.

  • Piastra - this element is a metal platform with a lever. Serves to change the height of the seat relative to the cross.

  • Permanent contact - connects the back to the seat and is responsible for changing its position.

Armrests are an integral part of most models, and all elements are connected with bearings, bolts, clips and various clips.

Types of damage

Due to the fact that the computer chair is a complex mechanism, mechanical breakdowns often occur during its operation. Specialists identify several of the most common types of defects.

  • Cross damage - A common problem only if the part is made of plastic. The metal cross is very rarely broken, has a long period of operation. The most common place of deformation is the intersection of the rays of the cross.

  • Deformation of the swing mechanism - A popular type of defect, which is indicated by the inability to fully rest against a vertical and elastic back. Tilting backrest is a sign of failure of the position locks.

  • Gas lift failure - a complex problem that involves the deformation of a pneumatic cartridge. This element consists of two chambers filled with air or gas. If the mechanism does not work and does not lower when the lever is pressed, this is a sign of a breakdown of the seal, piston or other gas lift elements.

To determine the type of malfunction, novice masters should focus on signs of breakdowns and what has broken:

  • inability to raise or lower the seat - breakage of the tip of the gas lift lever,
  • the difficulty of moving the chair - breakdown of the wheel hub, the absence of a snap ring,
  • one-sided skew of the structure - poor fixation of fasteners, manufacturer’s marriage, worn back mechanism,
  • excessive backrest mobility - permanent contact wear,
  • structural instability - breakdown of a gas lift or swing mechanism.

We should not forget about less significant malfunctions, which also require attention:

  • mechanical damage to the upholstery material,
  • subsidence of foam rubber,
  • broken wheels
  • deformation of the piastra.

To solve these problems, only a complete replacement of deformed elements is possible.

How to repair with your own hands?

Despite the complexity of the design of a computer chair, you can carry out its high-quality repair yourself at home. In order to repair the product, you must have basic professional skills, as well as a standard set of tools.

To restore the integrity of the cross, you can use two repair methods.

The first method involves filling the voids of the cross with polypropylene pipes, followed by fixing them with glue or a soldering iron. This method is short-lived and is suitable only for emergency repairs.

Professional craftsmen recommend using the second repair method, which consists of the following steps:

  • dismantling of rollers,
  • removal of the piastra,
  • dismantling the locking clip,
  • dismantling a gas elevator.

After removing all the elements, it is necessary to install a new crosspiece and assemble the structure in the reverse order.

If the swing mechanism failed during operation, and the backrest is not held upright, then experts recommend completely replacing it. To dismantle the element, it is necessary to unscrew the fixing bolts or nuts, remove the gas lift and dismantle the damaged swing mechanism.

If the breakdown is minor, then you can try to restore the old element, otherwise you need to purchase and put in a new part. If the chair was made in another country, then you may encounter the problem of mismatch in the size of the elements. Experts recommend installing adapter plates that will help prevent the drilling of additional holes.

Gas lift - a non-repairable element, if it breaks, a new part must be installed. The repair process includes the following steps:

  • dismantling of all external elements,
  • removing the protective cover,
  • removing the spring latch from the seat,
  • dismantling the bearing and all locking elements,
  • removal of the cross
  • cover removal
  • dismantle the damaged gas lift.

After carrying out all the preparatory work and removing the damaged part, it is necessary to proceed with the installation of a new element and the subsequent assembly of the entire structure.

In order to prevent inaccuracies during work, it is better to photograph all ongoing steps.

Terms of Use

To prevent the occurrence of complex breakdowns, and extend the life of the computer chair, experts recommend immediately after purchase to carefully study the manufacturer's instructions, which spells out all the operational nuances.

Along with the classic rules for using the product, professional craftsmen recommend paying attention to the following tips:

  • operation of the product only in a dry and well-ventilated area,
  • an armchair that was exposed to low temperatures is strictly forbidden to assemble and operate immediately, the optimal time for adaptation is 24 hours,
  • during assembly it is necessary to observe maximum caution, being careful not to break the thread when the elements are twisted excessively,
  • Excessive load on the spider is strictly unacceptable.

Specialists pay attention to the fact that one chair is intended only for one person, and the operation of the product by a large number of people can have disastrous consequences. You should sit on a chair gently and carefully, trying to avoid sudden and assertive movements. The armrests also need the same treatment, on which it is not necessary to press, and especially sit down.

Overweight people need to purchase only designs with metal elementswhich have great strength. And also with the help of a chair you should not move heavy loads and objects.

To spoil the integrity of the rollers and cause damage to the product can move the chair on the tile.

At the moment of getting of the wheels between the joints of the tile, they deform, and after some time a complete breakdown occurs.

The upholstery of the product, which needs to be handled with care and regular cleaning, also has an equally vulnerable level. To remove stubborn stains, it is permissible to use only special cleaning agents specified in the instructions. To extend the life of the computer chair, experts categorically prohibit giving it to young children for entertainment. Inappropriate use of the product may result in permanent damage.

We should not forget about the regular preventive examination, which provides for the lubrication of all moving elements, as well as tightening loose nuts and screws. The product should be audited at least 1 time in 3 monthsbut it’s better to pay attention to the chair every 30 days. If the above recommendations are not followed, the purchased chair can quickly fail, and the purchase of a new product will entail additional financial costs.

A computer chair is an important element of the workplace of every office worker. Given the increased demand for this type of furniture, manufacturers produce a wide range of such products.Despite the external differences, the design and principle of operation of the different types are almost the same, therefore, it is possible to eliminate the breakdown and restore the working condition of the product yourself at home, following the recommendations of experienced craftsmen, which will significantly reduce financial costs for the repair or purchase of a new chair.

How to repair computer chairs, see below.

Order a chair repair now!

+7 495 480-07-16 daily from 08:00 to 22:00

+7 495 368-77-61 weekdays from 09:00 to 18:00

Bring your chair to us for repair in the workshop at the address: Moscow, Elektrodnaya street, house 8, building 2

Often office chairs deteriorate during operation. But this does not mean that scuffs and complex mechanisms cannot be repaired. Professional repair of office chairs will allow you to update the surface and eliminate problems, bringing the chair back to life.

Repair Methods

Our company uses modern technology in the manufacture and repair of chairs. Our experts can replace and repair even the most complex structural elements due to sufficient equipment. We follow the latest in the professional field, so our office chair repair is always effective.

Repair Benefits

Repair of an office chair will avoid the financial costs of acquiring a new one. Replacing and repairing parts will take a little time, unlike the search for a new convenient model of chair. In addition, you can update the appearance of the chair by covering it with new textile or leather, which will also save on the search and purchase of a new chair. In this case, the repair should be contacted by professionals, only then you will get an effective result.

Turning to "Kreslov" to repair your work chair, you trust its professionals. Professional repair of office chairs is carried out in a short time and at affordable prices. We provide a guarantee for any repair work. Warranty period is 1 year.

Repair Reviews

In our company (“Atelier of armchairs”, as we sometimes call ourselves), practically every week they ask to repair their favorite armchair. We do this with great pleasure and professionally. What is your feedback ...

Sergey Valentinovich, Pushkino, Moscow Region 02/09/2016:
“... Actually, in Moscow there are few companies with which you can quickly and essentially agree. I found your studio by selection. Immediately stipulated the amount of work and cost (which has not changed). The quality of the repair is very decent, in practice I received a new chair after the repair at the price of a chair. It took 2 days to repair. I am satisfied and recommend your studio to everyone. ”

Dmitry Yuryevich, Moscow 05/30/2016:
“Unfortunately, my working chair was unusable. I wanted to buy a new one, but then I decided to repair the old and my favorite. I opened the site of the first office and the flour of choice where to repair, they disappeared by themselves, as a very charming person told me how they all wonderful, in just a couple of days and 6500 rubles, they’ll make practically new from my old chair. He turned out to be absolutely right, I was 100% satisfied with their work. I am enclosing the photo. Feel free to contact them - you will not regret it. Excellent work quality and very pleasant, responsive people. "

Thank you for your kind words and appreciation of our work!

Replacing Rollers

Over time, the rollers can fall out of the rays of the spider due to the wear of the plugs, especially if the latter are made of aluminum or plastic. To repair these elements, you must perform a series of actions:

  1. The chair is turned so that the rollers are on top.
  2. The wheels are removed from the cross. To do this, just pull them towards you.
  3. Cases are removed from the rays of the cross with a screwdriver.
  4. Damaged plugs are pulled out of the housing.
  5. Mount new seals and assemble parts in the reverse order: casings, then rollers.

A broken wheel is treated with superglue or replaced with a new one. A common cause of failure is the accumulation of debris, hairs, threads. In this case, the rollers are removed, cleaned, installed in their original place.

If the nest of fixing the axis of the wheels in the office chair fails, you will most likely have to change the crosspiece.

Crashed piastres

You can do the repair of an office chair with your own hands, if the master has experience with working with mechanics. First of all, it is necessary to clarify what material the cross is made of. It is better to replace the plastic part immediately, since it is pointless to restore a fragile product. The restoration of piastres is as follows:

  1. The chair is turned upside down; for convenience, it is placed with a seat on a chair so that the back rests against the surface of the floor.
  2. The wheels are removed from the mounts.
  3. Unscrew the 4 bolts that secure the swing mechanism and the piastra to the seat.
  4. Disconnect the gas lift with a light tapping with a rubber or wooden hammer. It is necessary to act carefully, otherwise the mechanism is deformed and will become unusable. The “sticky” compound is treated with a special liquid.
  5. Using a screwdriver, remove the pneumatic cartridge stopper, the washer, then the gas lift rod.
  6. Piastra knock down with weak tapping.
  7. Repairing a plastic part involves bonding, soldering, but these methods are only relevant if there is minor damage.
  8. The broken beam of the cross is fixed with plastic or metal plates, fixed with screws or super glue. Metal parts are restored by welding.

Repair of a computer chair must be done very carefully and accurately. A careless attitude can lead to damage to the piastra or pneumatic cartridge.

Unscrew bolts Knock down the piastre with light tapping Screw new

The destruction of the swing mechanism

If the swing mechanism breaks, you will have to replace it. The part is attached to the seat with 4 screws, so for dismantling it is necessary to perform a number of actions:

  1. All connecting bolts are unscrewed with a screwdriver.
  2. The pneumatic cartridge is carefully knocked out of the mounts.
  3. Drill holes in parts or use adapter plates.
  4. Replace the damaged element.

A computer chair is a popular type of furniture, but most models are made in China. Domestic spare parts, which can be found in the corresponding departments, are not suitable for them. In this case, you will have to order parts or try to repair the swing mechanism with your own hands (this will require a welding machine).

Pneumatic cartridge breakage

The pneumatic cartridge is a two-chamber product, inside of which there is air under pressure. Gas lift can not be disassembled and repaired at home, only a complete replacement of the part is possible. To fix an office chair with your own hands, you must follow the instructions:

  1. Disconnect the fasteners that hold the mechanism. For this, several screws are unscrewed from the seat.
  2. The seat is removed, the gas lift is removed, having previously slightly struck the structure from the side of the cross.
  3. The mechanism is removed from the metal case using a wooden or bronze drift.
  4. A new pneumatic cartridge is installed in the crosspiece, fixed to the seat.

The mechanism may break due to careless handling of the office chair, exceeding the recommended loads, prolonged use. Self-disassembling the pneumatic cartridge is strictly prohibited, as the master can get serious injuries. The best solution would be to purchase a new part and replace the damaged one.

Destruction of Permanent Contact

Thanks to permanent contact, the office chair provides reliable support for the spine. If the part is broken, it is not necessary to purchase a new one, you can repair it yourself. The necessary actions will depend on the nature of the breakdown:

  1. Deformation of a persistent spring, distortion of arms. To restore items, you need to return them to their original form.
  2. Deterioration of screw fasteners. In this case, only their replacement will help.
  3. Loosening the backs. Sealing permanent contact joints will help to get rid of this problem.

A step-by-step description of the actions will help you figure out how to fix the office chair correctly, without resorting to the services of specialists. Usually work on the replacement and restoration of elements does not cause difficulties for home masters. After repair, it is necessary to follow the standard rules for the operation of furniture, and then the products will last longer.